Representatives of the Reaction Research Society were invited to attend the 1st annual Friends of Amateur Rocketry (FAR) liquid propellant rocket symposium at the EAA Chapter 1 headquarters at the Flabob Airport in Riverside, California, on January 28, 2023. Dimitri Timohovich and I came to observe and participate in the all-day event including a range of topics related to safe design and operations with liquid rockets. There were hardware demonstrations giving attendees a direct appreciation for the importance of safety and careful planning with their system designs.
The intended audience was university rocket teams looking for best practices and expert advice. Mark Holthaus (president of FAR), Mark Ventura (RRS member and owner of Ventura Energy Systems) and Derek Honkawa (FAR member and private business owner) all gave excellent presentations covering igniters, propellant handling, part cleaning, and pressure system safety with a generous amount of examples of successful and unsuccessful projects at FAR.
FAR will soon make their presentation files available on their website for download. The RRS was glad to be there for this first of its kind event.
The RRS similarly has experts that have supported liquid rocket projects for decades at the Mojave Test Area. Contact the RRS president for requests and scheduling.
Also, the RRS will be holding our 80th anniversary symposium on April 15th at a venue location to be announced soon. This will be our first symposium since the pandemic and we look forward to having many speakers from industry, government, academia and the hobbyist community on topics related to liquid propellant rockets and many other subjects of interest to our public audience.
I would like to set the record straight on a common mistake I see with designing parabolic rocket nozzles.
The simplest and most common nozzle used in amateur rocketry is the simple cone. Most commonly the cone is a 15° half angle. But the simplicity of the cone comes at the cost of reduced performance and increased length. The next step up in complexity is a parabolic bell nozzle.
The parabolic bell nozzle design is a little more complicated and much more difficult to manufacture. Machining a parabolic shape out of metal on a lathe by hand is doable with a digital read-out (DRO) device but the process would likely be very tedious. In this case, I would recommend looking into some sort of computer-controlled system like CNC or 3D printing. If you’re using an ablative composite like silica-phenolic then tuning a wood mandrel on a lathe is very doable. Beyond the parabolic nozzle the next step up in complexity and efficiency is using the method of characteristics to design a rocket nozzle. This method was pioneered by Gadicharla V.R. Rao.
.These are sometimes called “Rao” nozzles. The parabolic nozzle is a decent approximation of a Rao nozzle, a method also proposed by Rao. Going further to get the last drop of performance would require a detailed computational fluid dynamics (CFD) based optimization.
I’m writing this report to set the record straight on a common mistake I see with determining the proper geometric and dimensional features of specific parabolic rocket nozzles. Almost all the amateur parabolic nozzles I’ve seen up to this point, including several college teams, and even my own early designs, made this mistake. It’s not really their fault though. The parabolic nozzle is commonly mention in rocket literature but rarely is one particular key fact needed to make them correctly explained. The two of the most prolific textbooks on the topic are, “Rocket Propulsion Elements” by Sutton and Biblarz, and “Modern Engineering for Design of Liquid-Propellant Rocket Engines” by Huzel and Huang. Both give their readers charts to help design the parabola and both also neglect to mention this one important fact.
That there is a problem at all will only become apparent when you try to solve for the exact equation of the parabola. If you read through the common literature (a task left to the reader) and go through the process you will see that the parabola is defined by two points and two angles. The two points are the beginning and the ends of the parabola. The beginning point is where the curvature at the throat, typically a circular arc, transitions into the parabola. The end point is the exit of the nozzle. The two angles, θn at the beginning of the parabola and θe at the exit are the angles between the centerline of the nozzle and lines tangent to the parabola at the two points. These angles are normally found by using graphs given in the literature. These graphs are the angles vs expansion area ratio as shown below. Note that they present the length of the bell nozzle as a percentage, Lf, of the length of an equivalent conical nozzle with the same nozzle expansion area ratio and a 15° half angle.
Footnote about the θn and θe vs expansion area ratio graphs.
I’d like to note that the graph I shared is the in the commonly presented form. However, if you look at the original paper on parabolic nozzles “Approximation of Optimum Thrust Nozzle Contour” by G.V.R. Rao in 1960” you will find the information presented differently. Instead of theta versus epsilon at various percentages of nozzle lengths given in terms of the percentage of an equivalent 15° conical nozzle length of the same expansion ratio (epsilon), the axes of graph are in terms of the ratios re/rt versus Ln/rt given at various values of θn and θe. These lines are straight in comparison to the curved lines in the graph above. The more common graphs are supposed to have been derived from the originals.
However, I have not gone through the math myself, but, I am interested in what the process and results would be. In turn, the originals are supposed to have been derived from full calculations of the Rao method. Again, something I have not tried replicating but it is something I would be interested in seeing the details of.
Another thing worth mentioning is that I recall reading online that someone had tried to reproduce these results using the method of characteristics. (Unfortunately, I cannot recall exactly where I read this.) The original graphs were based on using a fixed specific heat ratio (gamma) of γ=1.23 and the original paper stated “A different value of γ does not appear to appreciably change the nozzle contour when the area ratio and length are prescribed.” however the testimony I found online stated that they found that the gamma value did significantly affect the angles. I am in doubt over this anonymous internet testimony, but it is something I’m interested in exploring in more detail. If you ever investigate this yourself, dear reader, be sure to send us what you discover.
In total, you will have six parameters to determine, at point 1 you will have x1, y1, and θn. At point 2, you will have x2, y2, and θe. The obvious route from here would be to take the equation of a parabola (more precisely a square root since the x-axis will be our chamber centerline. But hey, a square root is just a parabola on its side), and these six parameters and try to solve for the unknowns in the equation.
This is where you run into the problem. The parabola is over-defined! You can’t solve for a parabola that meets all six criteria. It is impossible. Five of the defining parameters can be correct, but at least one will always be wrong. This is where most people, after considerable effort and eventually the banging of one’s head against a wall, will give up and let one, or more, of the 6 parameters to be wrong, usually by letting the starting angle of the parabola to be wrong.
When plotting a nozzle contour most put the centerline of the nozzle along the x-axis. The mistake everyone makes, including myself, is to make the natural assumption that this parabola is aligned with the nozzle’s same x and y axis in the same way as all of the parabolas in your algebra classes. That is to say the centerline of the parabola is around the x axis, the same axis of axial symmetry as the nozzle. But what everyone misses, including in the common literature, is that the parabola should be canted! That is to say, it should be rotated by some angle in relation to the x and y axis.
The way I found this fact out is by being a prolific reader. I’ve spent a lot of time gathering papers and books on rockets. I’ve only ever found one source that explicitly states the nature of these parabolasand that is in “Liquid Rocket Engine Nozzles NASA SP-8120” It simply refers the them as a “canted-parabola contour” and offers no further explanation. But that clue was enough for me to figure out what was going on. Adding the rotation of parabola adds a degree of freedom in the math. This allows for the equations to be solved with all the required constraints.
* Footnote on the NASA SP-8000 publication.
By the way, the NASA SP-8000 series of publications is a fantastic resource for the aspiring rocket scientist. Back in the 1970’s, they tried to write a comprehensive review of the state of the art in rockets and spaceflight. I remember reading somewhere that they fell short of their goal, since there was too much know-how to catalog. But what they did manage to publish is great. Whenever diving into an unfamiliar design topic, I’ll read the relevant SP-8000 article on it first as a good overview. Some topics may be more outdated than others, but much of it is still great and relevant today.
When trying figure this out, I went digging and found the original paper on parabolic nozzles. “Approximation of Optimum Thrust Nozzle Contour, by G.V.R. Rao, 1960” I had hoped it would directly state the parabola should be canted, but it doesn’t. However, it does give enough information to deduce this conclusion. In the short paper, its one page, Rao describes “a simple geometric construction for the parabolic contour.” It is something that would have been more familiar with the designers and draftsmen of that time. Today, we are more likely use a series of points and connect them with a spline curve, or use mathematical equations in CAD software to draw similar curves. But back then, designers would have to do it by hand on paper. The method suggested by Rao is called the “tangent method” of drawing a parabola. As the name suggests it involves drawing a series of lines that are tangent to the parabola.
Since we are interested in the mathematical equations, I won’t be describing that method any further. But it is plain to see from figures that the method does not directly depend upon the x, and y axis. The contour is simply plotted on the x-y plane and then the contour is revolved around to x-axis to create the three-dimensional nozzle. Since we cannot fit the desired parabola with the normal parabolic equations, we are left with the question:
How does one mathematically rotate the equation of a parabola?
Using parametric equations is how we will be able to create aparabola rotated on the x-y plane. Parametric equations also make some of the math easier when solving for circular arcs that are used in the rest of the nozzle contour.
First let’s start with vertex form a parabola.
To parameterize this, let us set:
And solve for x and y.
This pair of equations is now a parametric form of a parabola. But it is just a regular parabola and we need to rotate it. Recall from your study of trigonometry, that the formulas for rotating a point around the origin by angle θ are:
We can combine equations 3 and 4 by substituting the parametric equations into the place of x0 and y0. Doing this, we get:
From this, we can get:
Note that for our use case, because the rotation angle θ is a constant, h∙cosθ-k∙sinθ and h∙sinθ+k∙cosθ are also constants and can be replaced by single terms, c1 and c2 respectively. But we can name c1 and c2 whatever we like so I shall name them h and k respectively. (Yes, I know this seems like an odd maneuver, but it works fine for us and makes our equations a bit simpler.) With a little rearranging this then gives us the parametric form of a rotated parabola:
Now we are ready to solve for the parabolic nozzle contour. Before we do this for the above equations, we shall discus the rest of the contour as well. We will use a piecewise set of equations to describe the entire contour. For each piece we will need to solve for parameters and the split points between the different pieces of the function. We will go through each of them in order. How to size a thrust chamber is beyond the scope of this paper and is an exercise left to the reader. You should already have calculated the radius of the chamber, throat, and nozzle exit, rc, rt, and re, respectively and the length of the chamber and nozzle, Lc, and Ln respectively. The figure below shows a typical form of a thrust chamber. You’ll note that I’ve used z and r instead of x and y. This is a notation that I adopted early in my work writing a code for thrust chamber design. I figured z is up and rockets go up, so that’s where I’ll put the axis of symmetry of the chamber. I put the throat at z=0 for convenience. I decided to keep my notation in this report, instead of adopting something more conventional, for my own convenience of not having to rewrite all of my equations.
The first part of our piecewise function f1 is the chamber section representing by red in the figure. f1 is a simple horizontal line with the equation.
f1 Chamber Section
f2 Concave Curved Converging Section
The exact converging section shape typically does not strongly affect engine performance. So, the designer has a lot of freedom here butthe following geometric convention is common. Three parts are used, f2 (blue in figure) is a concave circular arc, followed by f3(green in the figure) is sloped line and f4 (orange in the figure) is convex circular arc. I’ve found that using the parametric form of a circle makes the math easier. The parametric form of this circular arcin function 2 is the following.
Were rf2 is the radius of curvature for function 2.
f3 Linear Converging Section
The third piece is a straight line and we will use the point slope formof a line. The designer provides the converging angle and a typical rule of thumb value is 30°. Using a bit of trigonometry, we can see that the slope will be tan(-θc). For the point we will use (z4, r4) which is where f3 intersects f4.
f4 Convex Curved Converging Throat Section
The fourth piece is another circular arc. The radius of curvature is typically given by the designer as a multiple of the throat radius. A typical a rule of thumb value of 1.5 time the throat radius is commonly used. We will call this scalar rc2. Again, we will use the parametric form.
About solving for the unknowns upstream of the nozzle throat
Solving the converging section is where we will notice a hiccup (minor problem). Say that you have a large throat and a small contraction ratio, Ac/At. This could mean the point where f4 meets the given converging angle, θc, of f3, could be equal to or larger than the chamber radius. A mathematical solution that uses the given parameters would fail to produce real geometry. A second problem could arise even when a valid solution does exist because the result could be an undesirably sharp radius if the point is too close to the chamber radius.
So, we have two solution paths. For the conventional case, we don’t run into the previously mentioned hiccup. Here, functions f1, f3, and f4 are sufficiently defined by the given parameters mentioned so far. But to define where the function f2 is located, we will need an additional parameter. In my work, I’ve decided to do this by setting the point r3 to be a percentage of the vertical distance between the chamber radius and r4. Where the concave f2 curve meets the linear converging portion, f3, is the location of r3. Where f3 meets the convex f4 curve is r4. My default value is 50% of the way between r4 and rc. I’ve named that parameter f2vp and its value should be between 0 and 1. The letters used mean: function 2, vertical percentage. (You are probably asking yourself “Why not just define rf2 in the same way as rf4, with a scaler multiple of rt?” Well good question. That’s the way I started doing it. It’s been a while but if I remember correctly, I found that it was hard to pick a default value that worked for a large variety of engines and if picked poorly results were either undesirable or didn’t solve. So, I came up with the above method which I found much more satisfactory.)
For the second solution path an alternat method for defining the converging section must be used. It will be convenient to set the radius of both of the concave, f2, and convex, f4, sections equal. Then we define the curved converging sections, f2 and f4, to each take up a percentage of the radial distance between the throat and the chamber radius. The linear section is the remaining percentage. I’ve named this parameter f2vp_alt. The name means: function 2, vertical percentage alternate method. Since there are 3 functions that take up this vertical distance, and two of them are equal the value for f2vp_alt must be between 0 and 0.5. If it is 0 that means that the linear portion takes up all the vertical distance and the curved portions would disappear. If it is 0.5 then the linear portion would disappear. The default vale I use is 1/3. This means that f2 takes up 1/3 of the distance, and f4 takes up 1/3 of the distance and the linear section, f3, takes up the remaining 1/3. It makes for decent looking converging contours.
This will always be solvable with real geometry, but means that theeither the converging angle or the radius of curvature for the converging portions cannot be pre-defined and is instead solved for. At first, I tried to let the converging angle, θc be derived. However sometimes the solution would be a very shallow angle creating an overly long converging section. Instead, I found better results by keeping the designer given θc and instead solve for the radius of rf2and rf4, which would still be kept equal. I was resistant to this at first because it would remove the ability to use the rule of thumb value for rf4, or any specified value for that matter. This will only work if the assumption that the designer will provide reasonable values for θcis met. To summarize, the primary method lets the radius of function 2, rf2, be an unknown to be solved for, and the converging angle of f3is given and the radius of f4 is given. With the alternate method the converging angle is given along with the vertical space the functions occupy. This leaves the radiuses of curvature rf2 and rf4, which are equal, to be solved fore.
When I have designed thrust chambers, I use the first method and then only switch to the second method if the first method does not work. The remaining question is when to switch to avoid a sharp corner. My solution was to specify that the concave radius, f2, take up a minimum percentage of the vertical distance between the throatand chamber radius. My default value for this is 15% but this was somewhat arbitrary. You can also avoid the second method by increasing the thrust chamber contraction area ratio if possible.
Converging section solution, Method 1
The following is a mathematical solution for the converging section when using the regular method for the converging section described above. From f4 we need to solve for z4 and its corresponding radial point r4. For that we need to find when the circular arc is at the givenconverging angle. This is when its derivative is equal to the slope of f3, the linear section, which is tan(-θc). We will take the derivative ofthe parametric equations of function 4. In case you forgot from your calculus class the derivative of a parametric equation is found by taking the derivative of each equation separately with respect to the parametric independent variable, in this case t, which will give us the equations for and . Then you divide the equation for by the equation for and cancels out and you are left with an equation for . Using this method on the equations 11.1 and 11.2 for function 4 we get
We solve this at t4 by setting the derivative equal to tan(-θc) which gives us
Solving for t4 we get
Note that this solution is periotic so it mathematically solves with any added to it. Through quick trial and error, we find a value n=1will put point (z4, r4) in the correct quadrant on the x-y plane. We then plug t4 into f4 to get the z4 and r4 coordinates.
Now that we know that value of r4 we can now check if the criteria needed for switching to the alternate method is met. If not, we can carry on to find r3. Recalling our assertion that r3 shall be some given fraction of the vertical distance between r4 and rc we see that it would be given by the following equation.
Next, we plug r3 into the f3 function [eq 10] and solve to get z3.
Now all that remains to be solved is z2 and the radius of curvature, rf2, for the concaved converging function f2. If we take f2 [equation 9] and plug in the known point z3, and r3, which both occur at t3, we get the following:
We can see that the there are three unknowns z2, rf2, and t3, but there are only two equations. So, we need a third equation to solve this system. We know the derivative of this function is the same as for the function f4, [equation12] since they are both the equations of a circle. And we know the value of the derivative at this intersection pointfrom the slope of f3, the linear converging section, which is tan(-θc).Setting equation 12 to tan(-θc) gives us the third equation we need.
We then solve this system of three equations, 18.1, 18.2, and 19 for the three unknows z2, rf2, and t3. This gives us:
We now have all the parameters and split points needed for each of the function to fully define the converging section. Equation 20 like in equation 14 also has a periodic portion of the solution, but here n=0.
Converging section solution, Method 2
With the second method everything is the same as the first method up to calculating t4 [equation 14] then the methods diverge. In method 2, after calculating t4 the next things to calculate are r3 and r4. This method defines the percentage of the radial distance between the throat and the chamber that the two curved converging functions, f2and f4, take up. This definition allows us to create, by reasoning, the equations for r3 and r4. They are:
Next the radius rf4 can be found by taking f4r [equation 11.2] at t4 when it will equal r4,
and then solving for rf4 and we get
Then we set rf2=rf4. For the remaining unknowns that define the geometry, we can use the same math from the other method. Those remaining unknowns are z4, z3, t3, z2 and are defined by equations 15.1, 17, 20, and 22, respectively.
f5 Diverging Throat Section
For the diverging section function 5, magenta in the figure, is again in the parametric form of a circle.
The radius of this function, rf5, is the diverging radius of the nozzle throat, it is given by the designer and is usually a rule of thumb value of 0.382 times the throat radius. But we still need to find the point z5, and r5. To do this we first note that the derivative of f5 is thesame as for f2 and f4 given in equation 12. We know what the angle of the tangent should be at z5, where f5 meets the parabolic portion. It should be the θn mention above and gotten from the θn vs expansion area ratio graph. From the same trigonometry used for the slope of f3we can set the derivative [eq 12] equal to tan(θn) at t5.Then we solve for the parameter t5 which gives us:
Like in equation 14 this also has a periodic portion of the solution, but here n=0. We then plug t5 into f5 [eq 27] to get z5 and r5.
f6 Parabolic Nozzle Section
The parabolic section of the nozzle, function 6, is yellow in the figure. As derived above in equation 7 we use a pair of parametric equations for a parabola with a rotation applied. I like to use ψinstead of θ here for the sake of symbolic variety.
Solving for the unknowns downstream of the nozzle throat
All that’s left is to solve for the remaining six unknowns in function 6. These unknowns are, t5, t6, m, h k and ψ. Note that the parameter variable t is unique for each section, so it’s technically a different t5 than for the t5 for function 5. We know six key data points on the parabola. We know the starting coordinates z5, and r5 from our prior work. We know the end coordinates z6, r6 from the exit radius and the length of the nozzle provided by the designer. If we substitute these coordinates into function 6, we would have the following four equations:
But it’s not possible to solve these four equations for six unknowns. We need at least two more equations. We know the slope at the beginning and end of the parabola from θn and θe which we got from the θn and θe vs expansion area ratio graphs. This means we can use the derivative of function 6 to give us the last two equations. To find the derivative function first we take the derivative of each parametric equation with respect to the parameter variable, t.
And then we divide by the equation for and we get:
Taking this function at t5 and t6 and using trigonometry to find the slope of the tangent lines at beginning and end of the parabola, we see that the derivative should be tan(θn) and tan(θe) respectively. This gets us last two equations we need for a system of six equations to solve for our six unknowns.
Now all we have to do is simultaneously solve the system. Here are the six equations fully written out.
As far as I can tell this can’t be solved symbolically. I’ve tried several methods including a few computer algebra systems, but always failed. (Give it a try yourself and let us know what you come up with.)
Instead, I solve the system of equations 41 through 46 numerically for m, h, k, phi, t5 and t6. This can easily be done with a calculator like the Texas Instruments, TI-89. But the way I solve this and the rest of the calculations is with a piece of custom software I wrote. My programing language of choice for doing this has been Octave, but it is possible to do with any Turing-complete programming language. Once you’ve done this and solved for those unknowns you now have a fully mathematically defined parabolic nozzle contour. One final note worth mentioning is that I typically use these equations to find the value r at a particular z location. If this z is in one of the parametric sections, then I first solve the equation fz(t)=z for t. Then I take the value for t and use it to solve fr(t)=r for the value of r.
Hopefully, that clears up any confusion and set the record … canted.
List of symbols
Ac = Cross sectional area of the thrust chamber
Ac/At = Thrust chamber contraction area ratio
Ae = Cross sectional area of the nozzle exit
At = Cross sectional area of the nozzle throat chamber
c1-c2 = Numerical constants
f1-f6 = Parts of the piecewise function that defines the nozzle contour
f2vp = Fraction of the vertical distance between r4 and rc occupied by f2
f2vp_alt = Fraction of the vertical distance between rt and rc occupied each by f2 and f4
fr1-fr6 = Radial portion of the of the piecewise functions that defines the nozzle contour
fz1-fz6 = Axial portion of the of the piecewise functions that defines the nozzle contour
h = Horizontal translation of parabola
k = Vertical, or radial, translation of parabola
Lc = Length of the thrust chamber, measured from the injector to the nozzle throat
Lf = Length of a bell nozzle given as a percentage of an equivalent 15° half angle conical nozzle
Ln = Length of the nozzle, measured from the nozzle throat to the nozzle exit
m = Scalar that is the stretch factor of a parabola
n = scalar for periodic solution, n can mean any whole number
r = Radial coordinate
r1 – r6 = Radial coordinate of points 1 through 6, see figure for location of points
rc = Radius of the cylindrical portion of the thrust chamber
rc1 = Scalier for the concave converging radius rf2= rc1 ∙ rt
rc2 = Scalier for the convex converging radius rf4= rc2 ∙ rt rule of thumb value of 1.5
rd = Scalier for the diverging arc radius rf5= rd ∙ rt rule of thumb value is 0.382
re = Radius of the nozzle exit
rf2 = Radius of curvature for function 2
rf4 = Radius of curvature for function 4
rf5 = Radius of curvature for function 5
rt = Radius of the nozzle throat
t = Parametric independent variable, it is unique for each pair of parametric equations
t1 – t6 = Parametric independent variable at points 1 through 6, and unique for each parametric function
x = Horizontal coordinate
y = Vertical coordinate
z = Coordinate perpendicular to the x-y plane
z1 – z6 = Axial coordinate of points 1 through 6, see figure for location of points
ε = Nozzle expansion area ratio, At/Ae
θ = Rotation angle of a parametric parabola
θc = Converging angle of the linear converging section, function 3
θe = Angle between the nozzle centerline and parabola tangent line at the the nozzle exit
θn = Angle between the nozzle centerline and parabola tangent line at the beginning of the parabola
ψ = Rotation angle of the parabola of the nozzle contour
The Reaction Research Society held its monthly meeting at the front office of the Compton/Woodley Airport, 7:30 PM PST. on Friday, January 13, 2023.
Agenda topics of the meeting were:
Welding helmets (Mohammed)
Gas Guzzler progress (Wolfram)
1/14/2023 launch event
* ROC high-power launches, terms of granting membership
* American Artist – LACMA
Work event 1/22-1/25/23
launch event on 1/28/2023?
2023 symposium on April 8 (Frank)
FAR liquid rocket symposium 1/28/23 at Flabob Airport (Dave)
Restroom progress (Dimitri)
Compton Comet work at MTA (Jamie)
Launch rail designs (Jackson)
Visit to Ventura Energy LLC, 1/12/23
micrograin resources, alpha (Jim Gross)
Another update which we were pleased to announce is that the President of the society has been formally admitted to the CALFIRE subcommittee on Fireworks, under which rocketry is governed, and which will be rewriting the existing regulations.
The Compton Comet project also had its first low pressure test earlier this month. There were many leaks, but the team is now nearing the point that they will need to carry on their testing at the Mojave Test Area (MTA).
A new member to the society, Abdullah Daya, also asked if there was any certificate available for those members who attended the society welding class in Vista. It was decided that the society would ask the instructors at a later time.
The society is pleased to announce that member, Wolfram Blume, is currently seeking his pyro-op license. He currently only plans to obtain a Class 3 Rockets license, but the society currently seeks to expand its license holder count which will ease the planning of future MTA events requiring the presence of the same.
There was also a fairly lengthy discussion regarding society owned tools. Society member Mohammed Daya researched welding helmets on behalf of the society, giving a recommendation for a particular brand out of a few. There was also a recommendation for individuals to use prescription lenses, and helmets with small viewports should be used to prevent ones vision from wandering.
There was also discussion of a new requirement that individuals using society equipment sign waivers to reduce our liability, similar to the waiver required for MTA use.
Unfortunately, due to the recent weather in California, the launch event on January 14th for a project by American Artist has been cancelled. Dave still wishes to meet with him at another time, and hopefully schedule another date for his project at the MTA.
Another unfortunate situation has occurred, in that the FAA has reduced ROC’s height waiver by a substantial amount (7,000 feet). This will make the larger high-power launches impossible from their Lucerne Valley location. However, it was suggested that the society could reach out to ROC, and offer them use of the RRS MTA for their launch events. Keith Yoerg said he’d reach out to start a conversation.
In regards to the RRS MTA site improvements, the creation of more launch rails therefore was discussed. Materials for the construction of the same have been bought, and their design was briefly debated, with radio towers being mentioned as a frequent base. It was also mentioned that CAD software would be useful in our construction of any of the larger rail designs. A 60-foot launch rail for liquid-fuelled rockets is a top priority at the society this year.
An update on USPS protocols has been announced, that all mail addressed to a PO box must now also give the street address of the Post Office it is located at. Any such mail without an address will be returned to sender, so mail to the society should have the address written as such.
Reaction Research Society
8821 Aviation Blvd.
P.O. Box 90933
Los Angeles, CA, 90009-0933
An unexpected but minor blow to the society’s fundraising was delivered recently when Amazon announced that the AmazonSmile program will be discontinued in February this year. The money earned by the society therefrom was not a vast sum, but per our treasurer, Larry Hoffing, the loss of this small revenue stream means that pizza parties will be cancelled indefinitely. The society has yet to hold one of these events but the loss will still be felt.
Starting on Sunday the 22nd, we are planning to have a multi-day work event at the MTA. This will do work on lighting and other electrical work on the site. Handicap rails and an access ramp also need to be installed soon. Dimitri will be present, and other volunteers are encouraged to participate as well.
On January 28th, there is another planned launch event for those wanting training in micrograin loading amoxil and launching. Jim Gross will be the pyro-op in charge.
Also on the same day, FAR will be holding a liquid rocket symposium at the Flabob Airport in Riverside. The RRS has been invited, but due to the limited gathering size only a couple individuals from the society will attend.
This April, Bill Claybaugh is planning to launch from the MTA. Likewise, the RRS symposium is planned to take place some time in April. Frank is currently in contact with the Gardena Community Center to see if we can hold the event there again this year on our 80th anniversary.
In regards to the symposium, there is currently no set budget, but it has been suggested that some of the society’s generous benefactors might be contacted to help cover costs.
Jim is currently in possession of zinc that might be used for sulfur micrograin. Some, contained in pales, are known to be good, but some received by mail are of unknown condition. It’s expected that the latter will be tested order phentermine soon so as to determine its use.
Next meeting will be February 10th. Contact the secretary for details.