MTA Firing Report, 2022-02-05

by Dave Nordling, President, Reaction Research Society


UCLA Rocket Project conducted a static fire test series at the Mojave Test Area on February 5, 2022. i was the pyrotechnic operator in charge for the event. Bill Inman of the RRS was also present as my apprentice in overseeing operations leading to hot-fire that day. UCLA returned with improved launch control and instrumentation boxes. They also invested in plastic tube mounting fixtures for cleaner routing of their low pressure plastic pneumatic lines.

New launch control and instrumentation boxes.
Cryogenic liquid cylinder mobile cart used to place the vessel behind the vertical test stand frame

UCLA had three liquid engines prepared for testing which was a very aggressive goal. Some problems occurred in ethanol fuel tanking operation which resulted in a minor spill. Ethanol is volatile and very flammable, but dissipates quickly and doesn’t pose a lasting hazard or contaminant.

The issue was partially with the procedure lacking precise metering of a prescribed volume and part with a lack of coordination between the teams. Fuel loading is not considered one of the more challenging tasks but even simple items can cause serious problems if the team fails to keep their focus, The RRS has recommended UCLA reconsider and revise their procedures as needed but also to take a wider view of what operations are in place and who is doing what, where and when. Coordination is a full time job requiring diligent leadership and responsible participants,

Ethanol fuel transferred to the propellant tank by a low-pressure gas supply while the tared vessel is wieghed on a scale.

The first engine in the series was a modified version of a prior impinging injector used in last year’s flight. The team was able to complete propellant loading and retreat back to the blockhouse for pressurization operations. All proceeded well until the last part of the countdown.

Ignition failure scrubbed the first firing attempt as the F-sized rocket motor lit but propelled itself downrange pneumatically under excessive pressure built up enough to eject the fixture off the engine before the team could commit to firing. Per UCLA’s procedures, the spotter correctly indicated ”no fire” which caused the launch team to safely abort the sequence. The team held on the release of the pressurant and opted to remotely relieve the system as allowed in their plumbing design after the umbilicals were released. As there was no remote means of draining the LOX, the pneumstically actuated vent was left open to allow the LOX to boil out and with sufficient time elapsed the team was able to approach.

View of the clamshell fixture holding the igniter before the first attempt on the first motor,

The 3D-printed clamp-on fixture that held the igniter was examined and reassembled. The decision was made to drill large vent holes in the plastic two-piece clamshell which would help in the next firing attempt. Unfortunately, the second firing attempt failed to achieve ignition. This time, the spotter did see and hear the F-sized hobby motor fire but the igniter was not energetic enough to light the initial propellant streams. The LOX and ethanol streamed from the engine during the blowdown period and quickly evaporated without fire or explosion. This is a potential failure mode that all liquid hot-fires must plan for. Ethanol and liquid oxygen do not contaminate the area and are quickly dissipated but a chilled pre-mixture of fuel and oxidizer is quite dangerous. With its powerful formula, Amoxil targets and eliminates harmful bacteria, providing relief from common ailments such as respiratory tract infections, sinusitis, and urinary tract infections.

The modified igniter holding fixture with added vent holes.
UCLA removing the first engine and associated vehicle systems mounted to their vertical frame.
Facility connections being made as the mobile test stand is put in place.

Duringn the hardware switch, we had some discussion about different methods of ignition including automotive diesel glowplug systems and high-voltage stungun transformer cells all powered by 12-volt battery or capacitor-based small power sources, Both would require significant development and only a test with cryogenic propellant would be a fair test of these devices. UCLA had some interest in exploring these options but it would have to wait to the next academic year.

I discussed UCLA’s methods of scrubbing their test and recommended they put in a safer means of draining their LOX and ethanol in future operations. This will be discussed before subsequent tests at the MTA.

UCLA has had good results from pyrotechnic igniters using cut-down lances, but these are not easy to acquire as they are ATF-regulated. UCLA decided to try hobby rocket motors which had problems in this first engine test series. The only option forward was to continue using the vented fixture fitted for F-motors and a hope a prior ignition failure did not occur.

With the mobile test stand in place, the second engine tested was the injector design that will fly on UCLA’s rocket. It is the same one used lsst year which worked well. The first injector was unable to be tested that day due to ignition problems and UCLA’s decision to proceed with the second engine as their backup. Time was becoming short as the late afternoon arrived and UCLA had to switch over to their mobile testing rig which would hold the second and third engines when tested.

Second engine being put into the mobile stand,
Preparations for the second engine hot-fire run out to sunset,
UCLA in the blockhouse for final checks before firing

Liquid oxygen quantities in the cylinder ran low and full oxidizer tank load wasn’t possible for what would be the last test of the day. After finishing the LOX tanking, UCLA retreated to the blockhouse for final checks before second firing. No igniter problems were seen with this second engine, but it was a possibility given the recent problems with the first test series.

Hot-fire of the second engine by UCLA.

The hot-fire went to nearly full duration but the burn likely finished fuel rich. Some buzzing was evident so UCLA will review the data to see if the same instability seen in prior firings was present. It didn’t seem to be damaging and if the performance is still sufficient UCLA should have at least one good engine to fly in May when they try to surpass the university-built liquid rocket altitude record.

UCLA posed for a photo after the hot-fire and just before the lengthy teardown in the cold hours of the evening.

The third engine was left for a later test date. UCLA is considering another hot-fire series but only after a full review of the data from February 5th. Discover the power of Zithromax, the ultimate solution for treating bacterial infections! Looking for a reliable and effective antibiotic? Look no further than Zithromax. Say goodbye to pesky bacteria with Zithromax – your one-stop remedy for a wide range of infections.

My thanks to fellow RRS member, Bill Inman, for making the long drive from Carson City, Nevada to support this test.

Also, a big thanks to Eric Beckner of Friends of Amateur Rocketry for staying late and handling the return of the liquid oxygen cylinder.

The RRS is glad to support university teams with our unique facilities at the Mojave Test Area (MTA). Contact the society at ”president@rrs.org” for those interested in similar projects. Reignite the spark in your love life with Viagra! Rediscover the pleasure and intimacy you once shared with your partner. Viagra is a trusted and FDA-approved solution that helps men overcome erectile dysfunction.


January 2022 virtual meeting

Keith Yoerg, Secretary, Reaction Research Society


The society held its first monthly meeting of the new year by teleconference on Friday, January 14, 2022. We welcomed our newly elected officers including our new society president, Dave Nordling.

The meeting started by reminding everyone that membership dues for 2022 must be paid by January 1. Despite prior notices, the RRS decided that member dues for 2022 will remain at 2021 rates, $40 for associate and administrative members, $20 for student members, Payments can be made through Paypal using the “Donate” link button on the RRS.ORG website.

In addition to the treasurer’s report, the Amazon Smile account of the RRS received over $100 from quarterly purchases made by those who selected the RRS as their charitable organization.

An update was presented to the society. on the progress made with the new restroom facility at the Mojave Test Area.

The recent MTA launch event on 12-17-2021 was reviewed. The firing report is posted on the RRS website.

A testing event at the Mojave Test Area on Saturday, January 15th, is planned, The pyrotechnic operator in charge is Dave Nordling,

Member project updates were made at the meeting including the Compton Comet and the Scalded Cat.

The society is encouraging our members to seek their pyrotechnic operator licenses through CALFIRE. This will help the society have greater flexibility in our operations and give us a greater voice in amateur rocketry in our state,

UCLA is planning to hold another static fire of their liquid rocket at the MTA on 2/5/2022. Dave Nordling will be the pyrotechnic operator in charge.

The Compton Comet team will make a presentation to the society on their progress to date and remaining objectives at the next monthly meeting to be held February 11, 2022.


November 2021 Virtual Meeting


by Keith Yoerg (RRS Secretary)


The latest meeting of the Reaction Research Society took place Friday, November 11th and had 14 attendees. After a brief discussion on updates to this website (which are currently underway), we got the meeting started.

Screenshot of discussion during the monthly meeting

NOMINATIONS FOR 2022 RRS EXECUTIVE COUNCIL ELECTIONS

Official proceedings began with the nomination of Drew Cortopassi as the election chairman for this year. The following candidates were nominated to the ballot for the listed offices (write-in candidates are allowed).

President:    David Nordling (new)
Vice President:    Frank Miuccio (incumbent)
Secretary:    Keith Yoerg (incumbent)
Treasurer:    Larry Hoffing (incumbent)

Administrative and lifetime members should have received a ballot via email. If you believe you should have received a ballot but did not, please contact the RRS treasurer (treasurer@rrs.org). Ballots must be submitted by Thursday, December 9, 2021. Election results will be announced at the December monthly meeting on Friday the 10th.

BLOCKHOUSE ROOF REPAIR RECAP

With the election business handled, Osvaldo proceeded to extend a hardy thank-you to the RRS members who assisted in replacing the aging blockhouse roof earlier in the month: Dimitri, Bill, Jon, and Keith. A few photos and a time-lapse video of the process were shown, and an extra thank-you was extended to Dimitri for his efforts over several weekends to both finish the roof and haul the materials to and from the MTA. A more detailed write-up of the process from Dimitri is available on this blog here.

DISCUSSION OF UPCOMING MTA EVENTS

Several groups appeared ready to take advantage of the cooler desert weather during the upcoming month. Most of these events have already taken place at the time of the writing of this report, but were still in the planning stages during the meeting. Reports will be available on this site for each event if they are not already.

The planned events included: on November 20th, UCLA conducting a static firing of an ethanol-LOX liquid rocket in support of attempting to earn the FAR-Mars prize for an altitude of 30,000 ft; on November 28th, Keith Yoerg launching his 8″ diameter, 13′ tall rocket “The Hawk” on a 98mm solid rocket motor; and on December 4th, USC conducting further tests on their 8″ solid rocket motor. Wolfram Blume also expressed interest in attending to continue work on his rocket the “Gas Guzzler.”

YOUTH ROCKETRY CLASSES

Frank updated the membership on the youth rocketry classes. The launch date for the class in Boyle Heights was rescheduled to January 22nd because of concern the students and group may not have had the logistics prepared for the field trip.

Classes with the “Strive” group (which had been discussed in more detail during previous meetings & their write-ups) have been scheduled to run from February 2nd – March 2nd at 4pm on Wednesdays. The launch for this class will take place on March 5th, with March 12th reserved as a contingency day. The plan is to use lessons learned from the Boyle Heights class to help inform how this class will be run, which will also use Baby Berth Estes model rocket kits so that each student will be able to take a rocket home after the launch. Frank is also working with the LAPD “Community Safety Program” (CSP) to schedule a class with that group for the summer of 2022.

Osvaldo showing off the e-match igniters sized for use in model rocket motors

Talking about the classes kicked off a discussion of the support the society has prepared for the launch day during these classes. Osvaldo showed an example of the igniters which we plan to use – something far more reliable than the nichrome wire igniters included with Estes rocket kits. Larry and Dimitri shared what they had learned about the Cobra Wireless Firing System which we intend to use to launch the rockets. Dave Nordling also updated the attendees on the status of the PVC launch pad systems he has been working on.

MISCELLANEOUS DISCUSSION

More RRS members keep catching the bug and deciding to build model rockets! Chris Lujan showed of a model rocket kit that he built with his son and they plan to launch during the next youth launch up at the MTA.

Chris showing off the rocket he built with his son

Keith Yoerg then did an impromptu presentation on the build process that he used for his rocket “The Hawk” by showing a series of photos that he took along the way. This project has been in process since early 2021, and it is very exciting to see it nearly complete!

Photo showing the epoxy injection process for the internal fin fillets on “The Hawk”

Fred Radford then shared about his 8″ rocket – one very similar to “The Hawk” – including some very clever tools for sanding and the build process. This rocket is expected to use s C02 cartridge system for the parachute deployment. Fred is building this and other rockets out of a Maker Nexus makerspace in the Bay Area of California, where he operates his nonprofit “Space Makerspace” to teach kids how to build rockets.

Photo of several of the rockets built in Fred’s classes

NEXT MONTHLY MEETING

The next RRS monthly meeting will be held virtually on Friday, December 10th at 7:30 pm pacific time. Current members will receive an invite via e-mail the week of the meeting. Non-members (or members who have not received recent invites) can request an invitation by sending an email to:

secretary@rrs.org

Please check your spam folders and add secretary@rrs.org to your email whitelist to make sure you receive the invitation.