MTA Launch Event, 2021-04-10

Posted on April 18, 2021 by kyoerg

by Keith Yoerg (RRS Secretary)

The RRS held a launch event at our Mojave Test Area (MTA) on April 10, 2021, the day after our monthly meeting. COVID-19 still remains a threat so everyone continued to observe protective protocols – masks & physical distancing. For the first time in months, we had a day with great weather for launching rockets and we made the most of it! We had low-power, high-power, and experimental solid rocket launches, another launch of Bill Inman’s Solar Cat, the maiden voyage of Wolfram Blume’s Gas Guzzler, and a static fire of Larry Hoffing’s solid power motors. Osvaldo Tarditti was our pyrotechnic operator in charge.

Activity around 9:30 am at the MTA – prep work ongoing for *CTRL+V* (left) and *Solar Cat* (right)

CTRL+V (USC RPL)

Preparation for the first launch of the day: CTRL+V actually began the day before launch with motor integration and other preparation work taking place at the MTA site. On the morning of the launch, the team from the USCRPL installed the rocket on the launch rail, which was then raised into place south of the MTA’s vertical test stand. Wires running from the rail were staked to poles and hammered into the ground to provide additional stability for the rail. Several launch crew members can be seen prepping the rocket above, and a still image of the launch of the rocket can be seen below.

Launch of USC RPL’s *CTRL+V*, the smoke took a strange path up the rail faster than the rocket!

The rocket flew on a 6″ experimental rocket motor. A specific procedure was followed prior to launch, under the supervision of the pyro op, which included radio go/no-go call outs from several teams including tracking, avionics, and even a drone that took footage of the launch! All spectators and crew were in the bunker during takeoff at 11:04 am – ignition was prompt and rocket left the rail quickly and cleanly. The initial telemetry reported by the team indicated an altitude of over 11 km. Several members then went off on the daunting task of recovering the rocket from wherever it landed.

LUMINEER (BPS.space)

The next flight of the day came from BPS.space with the rocket Lumineer. This launch was conducted from one of the pads just west of the vertical test stand. The flight took place around 1:20 pm on a commercial Cessaroni “N” motor and was livestreamed to a reported 9,000 viewers on YouTube. The rocket utilized a “fly-away” rail guide to provide stability and eliminate the drag of rail buttons, which can be seen still in the process of falling from the rocket in the image below. The target altitude was 10 km, but telemetry was lost shortly after takeoff so the actual peak altitude was unclear after launch, and the rocket was not recovered for some time.

GAS GUZZLER (Wolfram Blume)

Wolfram Blume has been diligently making the pilgrimage to the MTA events over the last several months and the weather has been uncooperative for his chances of launching, but that finally changed in April! The maiden voyage of the Gas Guzzler took place from the pad just west of the vertical test stand. This flight was conducted to answer several questions about staging during the flight – so the ram jet second stage was flown empty and only the first stage, commercial solid rocket motor was used to power the rocket. A slow-motion (10% full speed) video of the launch can be seen here.

Launch of Wolfram Blume’s *Gas Guzzler*, it’s so calm the flag on the vertical test stand isn’t waving!

The ascent of the rocket was smooth, validating the rigidity of the rocket’s design and the stability when empty. The data from onboard altimeters confirmed that the ram air entering the 2nd stage was enough to separate the 2 stages immediately (0.1 second) after motor burnout which occurred at 1,440 ft. The parachute for the booster stage deployed successfully and that stage was recovered without damage. The ram jet, upper stage utilizes a dual-deployment of a drogue parachute at apogee and main parachute at 1,000 ft above the ground. While each of these deployments were successful, the main parachute did not pull out of the deployment bag so the stage landed hard and damaged a few parts. Fortunately, the 2nd stage is not the final parts intended for the full flight of both stages so there will not be delays to the project to rebuild. Wolfram collected lots of useful data and plans to add a GPS tracker and other upgrades before his next flight. We all hope the weather remains in his (and all of our) favor!

CHARLIE HORSE (Keith Yoerg)

Up next was the 12th flight of Keith Yoerg’s rocket Charlie Horse. This was the first flight test of the LoRa GPS tracking boards discussed in previous reports. There are several difficulties with getting the units setup properly, not least of which being the frequent firmware updates required to pair the board with the mobile phone app (2 updates in as many months). Powering up the boards the night before would have helped eliminate these struggles, but a successful launch was still completed, a slow-motion (10% full-speed) video of the launch can be seen here, which was on a commercial Cessaroni I280-Smokey Sam motor.

Keith Yoerg’s *Charlie Horse* seen through the smoke of launch – the camera was tipping over!

One issue still to be resolved with the LoRa trackers is a setting within the Meshtastic mobile application which trades off tracking range for the speed at which new information packets are sent. The “medium” setting was used on this flight but for rocket flights it may be advantageous to reduce the range (which is purported to be up to 10 miles) in favor of more frequent location updates. More testing will be done on future flights in hopes of developing a cheap, simple GPS tracking available for rockets flying at the RRS.

SOLAR CAT (Bill Inman)

Bill Inman’s solar-heated steam-powered Solar Cat rocket took to the skies around 4:31 pm. While the weather was perfect for most of the projects, the light overcast that can be seen in the pictures above proved problematic for the solar heating required for the best flight. In addition by launch time, the solar collector was at its westernmost limit so no more heating was possible. At launch the water temp was 370 F and was at 130 psi.

Bill Inman’s *Solar Cat* takes to the skies for it’s 2nd launch at the MTA

The flight reached 41 mph speed and achieved a 60 ft altitude. While this was an improvement on the first Solar Cat launch at the MTA, with additional heating there could be even more impressive stats. While he can’t control the clouds, Bill hopes to arrive at the MTA site the night before a launch in the future to increase the chances of getting off a good test and launch before reaching our western limit of travel for the solar collector.

THE YOERG CHALLENGE (Dimitri Timohovich & Keith Yoerg)

With this being Dimitri’s last MTA event before leaving to Alaska for the summer, some other RRS members need to step up to the plate to keep the “Yoerg Challenge” alive. I have put out the call for more RRS members to build low-power rockets to fly at the MTA, and have left my 5-pad PVC launcher at the site for future launches. IT’S CHEAP, IT’S FUN, IT’S A CHALLENGE (and everyone is a winner)! What’s not to love? So get out there and build some model rockets!

The remains of the “Space Crater” – not covered in raw egg!

The entrants this month included Keith’s Big Bertha, Baby Bertha, and Hi-Flyer XL rockets and Dimitri’s Space Crater – which carried eggs in honor of Easter this month. Fortunately, Dimitri’s wife had the foresight to hard-boil the eggs because his rocket took the “Crater” part of its name a bit too seriously (the remains are shown above). A few of Keith’s flights before the GoPro battery died can be seen here.

SOLID MOTOR TEST FIRE (Larry Hoffing)

Larry Hoffing had some experimental solid rocket motors ready to test fire, but with all the other activity going on at the site he took the time to install a new “No Smoking” sign on the covered propellant loading area (shown below). Once things were a little less active, Larry was able to affix the motors and perform a test-fire. While the burns were long, they did not produce much thrust and need to be improved upon before use in a rocket.

No smoking sign added to the covered propellant loading area by Larry

CONCLUSION

In addition to everything detailed above, one of the USC RPL members flew a high power rocket to earn her Level 1 certification with the National Association of Rocketry, and Dimitri flew his water rockets with his son.

This was by far the most active event at the MTA in the past year and was an exciting day for anyone who likes to see rockets fly! Our next launch date has not been decided upon, but we hope to have an event in May to continue hosting at least one event per month at the site.

MTA launch event, 2021-03-20

Posted on March 21, 2021 by Dave Nordling

Dave Nordling, Reaction Research Society

The RRS held a launch event at our Mojave Test Area (MTA) on March 20, 2021, the spring equinox. COVID-19 still remains a threat so everyone had to observe protective protocols. We had a lot of wind that day making launch impractical, but we still were able to get many things done that day including another static fire of a hybrid motor, some system checkouts of the Gas Guzzler and a possible flight of the Solar Cat steam rocket. Osvaldo Tarditti was our pyrotechnic operator in charge. Also joining us that day was fellow Rockets 2nd Class pyrotechnic operator and RRS member, Jim Gross,

MOBILE TRAILER CLEANUP

Mike Gottlieb was a lifetime member of the RRS who passed away over 2 years ago. Years prior, he had acquired a surplus mobile trailer from the former Rockwell International company which was left to reside at the RRS MTA. By permission from his surviving family, this single-axle, climate controlled trailer has been donated to the society. The trailer was opened by the RRS president and the interior inspected by our members present at our March 2021 launch event.

The Rockwell mobile trailer at the RRS MTA

The interior needs a little work but otherwise has a lot of promise.

A spacious interior which could be used as an office space.

For now, the space will be used for light storage until more space can be acquired elsewhere. We used the time to reorganize the contents of our storage trailer. We hope to renovate this new mobile trailer soon and restore its climate control systems which will be convenient in the summer months.

PUBLIC ADDRESS SYSTEM AT THE MTA

During the cleaning and reorganization of our storage space, we pulled out the public address equipment we had. The 12 VDC battery powered system including loud speaker and microphones worked well in a test from the old blockhouse. The society has talked about having a more distributed system around the main areas of the site. This will require some further equipment purchases, but for now we have a core system to start from. The goal is to make coordination of our events easier to do when we have large groups of people at the MTA again. Further still, we’d like to coordinate launch timing better with our neighboring amateur rocketry group (FAR) to our south.

Keith Yoerg holds up the speaker after a successful test at the old blockhouse

NEW RESTROOM FACILITY

As discussed at the March 2021 monthly meeting, the society is going forward with building a new restroom facility with flushing toilets. This will be a big convenience to our visitors and members alike. The executive council has received bids and plans for the restroom and is working with suppliers to find the best solution given our budget. We are grateful to our generous benefactor and the many people who supported this project with their time and skills. More progress should be made soon as we would like to deploy this facility before the hot summer months arrive this year.

FIRST FLIGHT OF THE SOLAR CAT FROM THE MTA

Bill Inman and new member Jonathan Wells returned to the MTA for another attempt to launch the solar powered steam rocket, the Solar Cat. He has been making many adjustments and had his first launch near his home in Carson City. Today would be his first launch of his Solar Cat from the MTA.

Bill Inman and his team set up his parabolic solar heating system for today’s sunny day at the MTA

Bill was able to work out minor problems on his trailer mounted systems last month and was fully ready to use his solar heating and tracking system for the hours necessary to reach launching temperatures of the stored water load in his steam rocket.

Bill has had some minor problems with the release system which led to a unintended release of the rocket. No one was injured but it did cost him several useful hours for insolation (heating). His second attempt was only a partial heat load but sufficient to conduct the first (technically second) flight at the MTA. Keith Yoerg managed to capture the short flight in the late afternoon. It’s a bit comical to watch given how short the flight was, but it is a significant milestone in getting this non-traditional form of liquid propulsion to work. We look forward to the advancements, Bill will make for future flights from the MTA.

The Solar Cat gets a clean release from the launcher and clears the rails on 3/20/2021.

The Solar Cat reaches its apogee while still in the frame of the video recording.

The wind pushes the rocket back to the launcher for an ungraceful return then clonking to the ground.

REBUILD AND SYSTEMS CHECK OF THE GAS GUZZLER

Wolfram Blume had made several improvements since his last flight attempt of his two-stage ramjet-solid motor rocket. He was able to correct software issues but also made physical feature changes to his booster. Wind speeds were excessive for much of the day, so he used his time at the MTA for fit checks while on the 1515 rail launcher.

Osvaldo Tarditti and Bill Janczewski observe Wolfram Blume’s operations with his ramjet upper stage in our loading area. No gasoline will be used in the maiden flight which will test the booster and staging systems. The unique design will need some flight testing before committing to a full flight with a fueled upper stage,

Wolfram Blume walks to the launch pad where his Gas Guzzler rocket rests on the pad.

Wolfram was able to conduct his tests making use of the 1515 rail launcher. He left in the afternoon after completing his tests and will return for our next launch event planned for April 10. 2021.

WIRELESS FIRE CONTROL AT THE MTA

Wireless fire control is a remote means of conducting launch without stringing long wire connections. This has been a controversial subject at the RRS with some of our members actively supporting using these systems and others being skeptical about their safety.

Richard Dierking mentioned the Wilson F/X wireless firing system which has been used at the Rocketry Organization of California (ROC) and at the Friends of Amateur Rocketry (FAR) site. Fellow RRS member, Dmitri Timohovich, has used Cobra Firing Systems for pyrotechnic events in the movie business with success. He brought one of these systems to demonstrate at the MTA with test bulbs. The 64-bit encryption in this system vastly reduces the possibility of stray signals causing an unintended firing.

Two 18-channel fire control boxes with the remote in the middle.

A decision was made at the March 2021 meeting to proceed with care by testing one of these wireless fire control systems with only low-power simple model rockets. We also thought meeting with a sales representative or technical advisor from a wireless fire control system manufacturer to explain the safety of these systems to the society would be an excellent idea. Some of our members have had a negative experience with these systems with unintentionally firing. Older wireless fire control systems have had safety issues. Safety in operations with pyrotechnics of any kind is of paramount importance.

wilsonfx.com

cobrafiringsystems.com

The RRS plans to educate themselves further about wireless firing system technology before making any further policy decisions. It is agreed that every pyro-op in charge at the event has the final say about what systems are and are not allowed at the event. The best course of action for any project leader is to discuss all aspects of their test or launch with the pyro-op in charge well in advance of the event at the MTA.

STATIC FIRING OF THE HYBRID MOTOR

The last two firings of the Contrails H222 38mm 16-inch hybrid motor left some questions about how reliable the ignition of the motor is. From both prior flights, it was evident that quick severance of the nylon plastic fill line at the launch command was not happening. Altitude was very low from such a powerful motor according to the curve. Since the last flight damaged the rocket body beyond repair, the next firing was intended to watch the startup sequence in careful detail under static conditions.

The motor survived in tact from the last short flight, The nozzle, spent grain and floating injector were shoved forward from the impact, but all parts were able to be removed, cleaned and reassembled for another firing with the last of my three fuel grains from the kit.

.The Contrails H222 motor reloaded for the third time.

The static test firing was done on the vertical test stand using a simple wooden fixture and 1/2-inch fasteners. The fixture was built quickly and unfortunately not perfectly. We had to fire the motor upside-down which is not representative of how the engine flies.

The vertical test stand holds the hybrid motor ready for firing with the fill line above and clear vent line below.

The 3/16” nylon fill line c0nnects to the floating injector push to connect fitting below the fuel grain and graphite nozzle held down by the snap-ring. The electric match is wrapped along side of and held against the fill line.

Acrylic 1/8” vent line from the top bulkhead push to connect fitting

The igniter used in the 3-20-2021 test used an electric match as was done in the second test. The kit comes with an electric resistor. In the first test, this was insufficient to get ignition and sever the fill line. Second firing used an electric match and a fragment of composite propellant. This achieved ignition but the fill line wasn’t fully severed. The third attempt used a similar load with a bit more composite propellant. The idea was to produce an ignition flame hot and fast enough to soften and sever the pressurized nylon fill line, With the escaping oxidizer liquid, the combustion should be enhanced and help sever the line. In practice, this doesn’t seem to occur quickly enough,

In the hybrid firing that day, the igniter fired and some chuffing from the nozzle was seen but the combustion was not sustained and the oxidizer supply emptied. The motor will be disassembled and inspected to see if all the composite propellant was consumed or if the nitrous oxide dispersed the pack before the full burn could finish.

A thin piece of composite propellant pressed against the electric match head pressed against the nylon fill line.

Floating injector loaded with the igniter and fill line strung through the fuel grain and nozzle.

The hybrid firing box with ruggedized 100-foot cable

The new hybrid rocket firing box with built-in solenoid valve and fire control.

MORE WATER ROCKETS

Dmitri upgraded his water rocket launch system to fire multiple rockets. He had a remote firing box which made it very easy to set up. The winds were too strong for any high altitude flights, but the modest water rockets were plenty of fun.

Water rockets lift off from the new blockhouse.

MODEL ROCKETS

The Yoerg Challenge started as a simple request to those attending our meeting on March 12, 2021 before the launch event: build as many model rockets from as many people as possible and launch them from the multi-wire launcher array that Keith built last month. Dmitri and I both answered the challenge for the event, Although many of our members have built many model rockets since they were kids, some of have not. For those experienced and inexperienced, the Yoerg Challenge was issued. More rockets at each successive event inspires others to build more rockets and more ambitious rocket builds. The RRS is for all forms of reaction propulsion even with a simple model kit.

The Estes Generoc E2X loaded with a C6-7 motor. An inexpensive and simple answer to the Yoerg Challenge,

Dmitri Timohovich built the Firestreak SST for the Yoerg Challenge

A few model rockets fly up and away at our arch.

At the end of the day, Keith and Dmitri launched their model rockets using small “A” sized motors to keep their altitudes low and avoid being carried far downrange with the high winds. I decided not to fly my first model as I left early that day. We hope others will build and bring theirs at our next event.

IN CONCLUSION

Next launch event will be April 10, 2021, with USC and member projects.

MTA launch event, 2021-01-09

Posted on January 13, 2021 by Dave Nordling

by the Reaction Research Society

The Reaction Research Society held its first launch event of the new year on Saturday, January 9, 2021. Dave Nordling was the pyro-op in charge. We had a couple rockets prepared and some maintenance work we wanted to continue. Dmitri Timohovich brought his whole family to the event and we enjoyed grilled burgers there at the Mojave Test Area. The January winds were light and cool that day. It was a good day for launch.

Bill Inman enjoys a burger in the George Dosa Building

Everyone relaxing for a short lunch before getting to launch.

Wolfram Blume brought his two-stage rocket, the Gas Guzzler. His ramjet upper stage was rebuilt from last year’s unfortunate breakage when dropped during loading on the launch rail last year. 3D-printed plastic parts can sometimes be very brittle and care must be taken.

The 1515 launch rail was put into position with some help from Bill Inman and a few others. Bill Inman is still working on his solar tracker for his latest iteration of the Scalded Cat. He made the trip from Carson City to the Mojave Test Area to help others with operations and we were very thankful.

Wolfram was able to mount his booster stage on the rails and carefully erect the launcher. The booster uses a commercial solid motor, an Aerotech “K” motor.

Wolfram cleans the 1515 rail at the RRS MTA in preparation for mounting the booster

Wolfram’s booster sits on the launch rail

The ramjet for this first flight was loaded with water to simulate the weight, but would not be fired. The primary goal was to demonstrate the staging and recovery systems powered only by the booster. Wolfram went back to the loading area to complete the preparations of the upper stage. During a system checkout, the parachute deployment charge fired. After some careful examination, the source of the problem seemed to be related to errant software commands. Wolfram aborted his launch attempt and returned with his rocket stages for further examination back in Los Angeles. Although the charges could be reloaded, he could not be certain that an early parachute deployment would occur and wreck his vehicle during flight.

Dmitri Timohovich and Waldo Stakes worked on completing the welding of the new steel plate on the vertical test stand. This plate on the vertical test stand was damaged during a test failure many years back and late last year was finally cut out and the space grinded to fit a replacement plate. Unfortunately, the stick welding system would require a different type of welder and a more powerful source to drop a reliable weld. The welding of the plate will be reattempted at the next event.

With the grinding complete, the plate is fitted and ready to be welded in place

The second launch of the day would be Dave Nordling’s nitrous oxide hybrid rocket. This 38mm H-sized commercial hybrid motor kit from Contrails Rocketry (H-222 model) had a modified igniter and was mounted in a new 4-inch body made by Larry Hoffing. The prior launch attempt had issues with severing the nylon plastic filling line so the ignition energy was increased with small bit of composite solid propellant ignited by an electric match.

Several minor problems occurred during launch preparations. The nitrous bottle and manifold filling system was working well but the electrical control box failed during tests. After some discussion, the defective switch box was removed and we were able to fire and get a clean launch

Dave Nordling leans against the old blockhouse with the second build of the hybrid rocket waiting for launch

We repacked the motor before launch and adjusted the vent tube to be more visible. The filling of the rocket went quickly and smoothly, only about 20 seconds before the white stream of liquid could be seen. The filling was stopped and with a short five-count and the rocket was fired. The rocket came off the rails quickly and it seemed that the modified igniter worked. The big problem was the parachute recovery switch wasn’t turned on before launch. This simple oversight would mean a rebuild would be necessary.

The simplest error can lead to sad results.

The rocket was recovered on the north end of the MTA site. It only seemed to reach about 300 feet of altitude. Unfortunately the ballistic landing broke both stages and the internal motor mounts and a complete rebuild is necessary. The motor case was parts were in tact and so it was extracted and will be reloaded,

The hybrid motor seems to arc to the north against wind.

Beckie Timohovich recorded the hybrid flight on her phone, The rocket seemed to immediately curve to the north off the rails opposite of the wind. It seems that the nylon fill line might be still holding fast despite the added solid propellant charge. The 3/16-inch nylon plastic line being strong enough to hold back the 900 psi nitrous pressure, it also poses a challenge to cut cleanly from the ignition charge. A static firing of the motor will be done next to get a better look at how well the fill line severs and measure the thrust curve directly..

The remnant of the fill line from within the hybrid after firing. The end looks smoothly extruded.

After recovering the hybrid rocket and putting away the equipment, we flew a water rocket for Dmitri’s young son. Although very simple, these things are very fun.

Max Timohovich holds the water rocket fired several times at the end of the afternoon.

The event was a partial success and there is more work to be done on our facilities including adding a new toilet facility at our site and welding in the plate on the vertical test stand. The next hybrid rocket launch may be a couple months away, but Bill Inman may have his next design of his solar heated steam rocket ready for launch af fhe MTA in a few weeks. He had his first successful flight in the Nevada desert just before Christmas. He is getting ready for a flight from the RRS MTA.

Bill Inman has his first successful flight of his solar-powered steam rocket on 12/22/2020

Wolfram seemed confident that he too might be ready to try his first launch of the Gas Guzzler at about that same time. If the next launch event occurs before the next monthly meeting on February 12, 2021, the announcement will come through the society email list.

The sun sets at the RRS MTA after a good day.

Reaction Research Society

Established 1943

Tag Archives: steam rocket