October 2022 meeting

by Dave Nordling, President, RRS.ORG


The society met at the Compton Airport front office again for our monthly meeting on October 14th. Mike LaGrange joined us by teleconference for the first time. Joel Cool-Panama was welcomed as our newest administrative member.

We first reviewed past events,

  • USC RPL sample grain burns
  • pad anchor modifications
  • restroom progress at the 10/1/22 work event

We spoke of pending events

  • Bill Claybaugh’s new pad, 10/20-10/22
  • Aerospace Corp launch of experimental motor, 10/20
  • next work event, 11/5-11/6, more plumbing
  • USC RPL static fire on 11/12
  • Events subject to change, public calendar soon to come online with the new website

The RRS reported quarterly dividend from Smile.amazon.com

Further concrete repair work is needed. Four of the 28 mounting holes need more work. This will likely be done by the society. We need to determine best way to extract old anchors and patch the holes with sufficient time for curing before redrilling. USC RPL will assist by drilling final anchors once repair work is done. USC has been very helpful in making this important site improvement.

A budget update on restroom with expenses to date and how much to finish. Last estimate showed we’re on target. An update is coming before next month. Our goal is for the restroom to become operational by year’s end.

The society is working hard to help other members to become pyro-ops. More pyro-ops means safer operations and greater flexibility in future events. Frank and Bill Inman have their letters and are working on their applications. The best way to start is being active with society events and apprenticing under experienced and licensed individuals.

RRS has updated their flight waiver with the FAA to 100,000 feet. Some planning and advance notice required. Laminated copy of our waiver and instructions will be put in the Dosa Bldg. Also, launch requirements available from the RRS president.

Patrick Finley of the Collegiate Propulsive Lander Challenge attended. He explained his foundation to encourage propulsive landing technologies among university groups. Five technology prizes. The RRS is a supporter of this initiative. He can be reached at “patrick@landerchallenge.space”

Wolfram Blume has been working on the Gas Guzzler over the summer. Fuel pump and flameholder fixes. Next flight could be in December?

Bill Inman is building the 2nd generation Solar Cat with fellow member Dale Talcott in Nevada. Subscale prototype built in the summer had excellent focus and heating. Next test at MTA could be December, perhaps January.

John Krell’s avionics chips have had some improvements. Now can do 16 channels at over 1 kHz all on a chip fitting in a slim alpha payload tube

First meeting with LACMA by the president and VP on a STEAM project focused on the arts. Further discussions will better define the RRS role. 

2023 Symposium will celebrate our 80th anniversary, tentative date is April 8. Researching locations, food service and potential speakers. Official launch will be in the new year.

New launch rail design proposed for high power rockets using 24-feet of 1515 launch rail and a 1-ton hand-winch to operate. It will be an outdoor fixed asset and supplement existing launch rails. Need to get a materials list and drawings made for a contractor quote.

Larger 60-foot launch rail for liquid rockets is in the planning stages. The RRS has had several entities interested in using such an asset.

We will soon be starting the effort to sort out the old equipment in the north yard, determine the purpose, origin, and dispose or refurbish each item. We must use our space wisely and not store articles without a relevant purpose. Junk will always fill a void.

RRS may be getting a new pair of storage containers and fire-fighting equipment. Council is in discussions and supportive of this site improvement. More details later.

Some at the meeting indicated strong interest in learning how to weld. The RRS is seeking an instructor which may give us training for a nominal fee. More on this next month.

3D printers were discussed near the end of the meeting. Several members have the devices, but design tools are just as important. Google Sketchup, Solidworks and CATIA are options but costs on some can be prohibitive. This would make a fine topic for a future article on RRS.ORG

Nominations for executive council offices will be at the November meeting next month. An election chairman will be appointed who is neither a current office holder or a candidate for office.

Next meeting at Compton Airport front office on 11/11/2022 at 7:30pm.