May 2018 meeting

The RRS held our monthly meeting on May 11, 2018 at the Ken Nakaoka Community Center. We were well attended, but got a late start. After the reading of the treasury report, we started with the discussion of the agenda items. We were happy to be visited by Wilbur and Mel Owens and Harry Reid of the Compton area. They heard of our work with schools and have interest in rocketry projects. We hope to form some kind of partnership to help support like-minded Los Angeles area groups.

RRS president, Osvaldo Tarditti starts the May 2018 meeting

May 2018 meeting of the RRS gets underway

First on the agenda was discussing the results of the 75th anniversary symposium. We had a lot of great feedback and built a lot of good relationships with industry, universities, schools and private groups at the all-day event. We also discussed some of the lessons learned from the symposium and what worked well and what could have been done better. The RRS is very grateful to the many people who supported the RRS in making this event possible. The discussion then turned to discuss if the RRS will hold a 2019 symposium around the same time next year. After some initial discussion, the vote was postponed to next month’s meeting.

Discussion of the 2018 RRS symposium

Second on the agenda was the upcoming launch event at the MTA on June 2nd with UCLA. UCLA will launch 10 of their commercial rocket motors as the final part of the quarterly class that Dr. Spearrin has with his students. The RRS is glad to host the event and we also plan on launching at least two of our standard alpha rockets at the event.

Alpha rocket iso view

Also, the RRS horizontal thrust stand is nearly complete as Osvaldo and I confirmed the fit of the final load cell parts to the frame. Osvaldo brought the frame and I brought the load cell to the meeting. Everything looks ready to go for final fit up on the concrete pad at the MTA at the June 2nd launch event. Having the ability to make actual thrust curve measurements on the RRS standard alpha rockets will be very valuable to better understand the performance of this classic rocket. Much of what is known of the flight characteristics is based on old knowledge which could be somewhat theoretical. Getting new data will be a step in the right direction to reducing uncertainty.

RRS horizontal thrust stand sits on a dolly at the May 2018 meeting

payload tube adapter, S-type load cell and thrust stand adapter; fit check is complete

After some discussion of scheduling other possible launch events at the RRS MTA with Cal Poly Pomona and USC, we moved on to the next agenda item.

The third topic on the agenda was about the next educational event that the RRS will support with our partners in the LAPD CSP program. This summer program will be with Operation Progress in Watts. The first session will kick off on June 15th and the final launch event is planned for July 7, 2018.

Operation Progress – Los Angeles

The fourth topic on the agenda was regarding the RRS pyrotechnic operators manual that I am compiling for the society. The RRS uses licensed pyro-ops at our events and we are on a mission to expand our roster to better support the growing activities at the MTA. Osvaldo, Richard and I have begun the process of getting endorsement letters from our fellow pyro-ops and when our applications to the state of California’s Fire Marshall office are complete and received, we will take and pass the exam to become licensed. Having a society manual to capture this knowledge is not only useful to train new pyro-ops but it is beneficial for all of our society to have simple access to this important information.

RRS pyro-op manual and training guide

The fifth topic on the agenda was a discussion of RRS payloads. I have been pushing our society membership to think about and design payloads for the many RRS standard alpha rockets we launch. Although the payload tubes are very small (1.60″ inner diameter), there are many opportunities for flying ever-shrinking sensors in these payload volumes.

Larry brought a few commercially available sensor packages that he hopes to fly in beta rockets. Some of these devices are simple and powerful which have been used in high-powered model rocketry with a lot of success. Payloads such as these will certainly work well in RRS rockets as well. Beta rockets tend to be expensive, so it would be nice to have those that fit inside the alpha payload tubes (1.600″ OD or about 1-1/8″ square).

most payloads are too big for the alpha payload tubes; force-fitting doesn’t help

Example of pre-fabricated instrumentation package; clean, simple, but often too big

I have designed an in-line second stage for an RRS standard alpha. Osvaldo was kind enough to machine the interstage and second stage pieces that I described in last month’s meeting post. The second stage would have a solid motor poured into a PVC casing that fits within the standard alpha aluminum payload tube. The pieces fit very well together which is very encouraging. I took the interstage part home with me to integrate the umbilical port and wiring and work up the delay timer for the upper stage igniter.

RRS standard alpha interstage and second stage motor casing

The final topic on the agenda was an idea that Osvaldo had for more educational program at the RRS. The RRS has gotten to know many fine speakers in areas of professional and amateur rocketry. In the past, we have invited speakers at our meetings, but we often don’t have an appropriate amount of time to listen and discuss these topics at length. The idea put forth is that the RRS would hold Saturday morning presentations to our interested membership. The idea was well received and approved by the society. A list of speakers is being built and Osvaldo will try to schedule the first presentation in what we hope will become a long series. More details will be coming in future announcements.

One last topic wedged in as we were finishing was that the RRS will be attending the Two-Bit Circus event in Hawthorne, California, next Saturday, May 19, 2018. The Two-Bit Circus is a high-tech STEAM-based amusement park that started in downtown Los Angeles and is growing to include more areas of the city. The RRS is glad to be a part of it. The link to the event is below.

Two Bit Circus – Hawthorne 19-MAY-2018

The RRS will have a booth at the Two-Bit Circus and will be bringing our air launcher for small paper rockets. Frank built a new air launcher that’s a little cheaper, but just as powerful and fun to try. The RRS will have it available for demonstration near the basketball courts at the event.

Frank’s T-shaped air launcher

The RRS meeting concluded late at 9:25pm. We are grateful to the Ken Nakaoka Community Center for letting us stay beyond the 9pm closing time of the center. The RRS must try to begin our meetings on time so we can finish on time.

If there is anything I have missed or misstated, please let me know.
secretary@rrs.org

The next monthly meeting of the RRS will be June 8, 2018. Please join us.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.